Аналогов
Импулсни vs CC (постояннотокови) LED драйвъри - Версия за принтиране

+- Аналогов (https://analogov.com)
+-- Форум: Практика (https://analogov.com/forumdisplay.php?fid=4)
+--- Форум: Общи електроуреди (https://analogov.com/forumdisplay.php?fid=37)
+--- Тема: Импулсни vs CC (постояннотокови) LED драйвъри (/showthread.php?tid=94)



Импулсни vs CC (постояннотокови) LED драйвъри - mzk - 16-04-2017

Тъй като възниква този въпрос, ето малко информация по темата:

http://www.candlepowerforums.com/vb/showthread.php?324471-Pulse-driving-vs-Normal-Constant-Current-Driving-Leds
http://www.candlepowerforums.com/vb/showthread.php?216904-PWM-vs-Constant-Current

Цитат:The major problem with PWM is that most circuits do not ramp up
the current drive to the LED with each pulse. This results in a high
current shock to the junction point of the bonding wires in the LED.
Sputtering of the wires at that point cause the wires to erode over
time causing an increase of resistance, that causes heat build up and
failure of the wires at that point. In an application that is on for a
considerable amount of time the LED life is shortened. With a flashlight
that is used normally and not in a job related application there should be
no problem.

Curt

Следва да се експериментира дали в импулсен режим човешкото око възприема по-добре пиковото премигване (когато става въпрос за отразена светлина, т.е. фенерчета и прочее!!!), но в общия случай импулсният режим изисква по-голям ток, лошо влияние върху връзките към прехода, трептене => възможни неприятни биологични влияния.

Струва ми се, че стопове, мигачи и фарове на новите таратайки са в импулсни режими... Dodgy